How the high pressure cleaning pump matches the high pressure hose

High pressure pumps used in the operation condition of the high pressure cleaning, often because of work pressure, flow rate is bigger, use high pressure rubber hose, high pressure pumps matching if proper use and maintenance, can be relative to prolong the using time, achieve the goal of saving and cost reduction. So when using the high pressurecleaning pump should pay attention to which aspects of the problem? How should the high-pressure hose line of the high pressure cleaning pump be used correctly?
The inner diameter of the first, choose the high pressure rubber hose, it must be the diameter and high pressure pumps need to match, if choose the hose diameter and high pressure pump provided does not match, will affect the normal use, will also be premature damage of high pressure hose.
Second, when choosing high pressure pipe, according to the technical parameters of high pressure pump to determine, according to the requirements of the parameters, select the matching pressure hose, do not use more than the actual pressure operation method, even more than a few, that may also affect the use of high pressure hose to normal life. When the choose and buy high pressure rubber hose, can choose appropriate under high pressure products, for example, high pressure pump is required by the 1500 bar, you can choose and buy 1800 bar hose, rich leeway, so it is easier to extend its use fixed number of year. It's like saying you'd rather have a cart with a big horse than a cart with a big horse.
Third, use, maintain and maintain high pressure rubber hose in strict accordance with relevant rules. When the high-pressure cleaning equipment is working, the rubber hose cannot be twisted by hand. If it is necessary for the construction, the bending radius should not be too small, nor should the Angle be too small. During the operation of high pressure pumps equipment, it is not allowed to open and close the high pressure nozzle repeatedly, so as to minimize the impact damage caused by the frequent operation of sudden opening and sudden closing. When the ultra-high pressure hose is not in use for a long time and does not work, the water in the hose should be drained away. After winding the hose into a coil according to the specified size, the hose should be placed horizontally.